Job Description

JOB DESCRIPTION

MEP Engineer – Design \& BIM

Position: MEP Engineer (Design \& BIM)

Business Unit: Building Services Engineering (MEP / M\&E)

Experience: Minimum 5 years (combined MEP design \+ BIM)

Location: Bengaluru

Employment Type: Full\-time

Reports To: MEP Design Lead / Associate Director – Building Services

About Clancy Global

Clancy Global is a multidisciplinary building engineering design consultancy, operating as a joint venture with Clancy Consulting UK since 2005\. With core expertise in Building Services (MEP / M\&E), Civil \& Structural Engineering, Smart Infrastructure, Sustainability, BIM, Dynamic Thermal Simulation, and CFD, we have delivered 700\+ projects spanning 300\+ million sq.ft. across 58 cities and 5 countries. Guided by our motto “Engineering Evolving”, we stay ahead of the curve through technology adoption, BIM\-led workflows, and multidisciplinary training — offering our clients a coordinated, single\-point\-of\-contact design experience.

Role Overview

We are looking for an MEP Engineer with a strong design background and hands\-on BIM expertise to join our Building Services team. The role combines technical design of HVAC, Electrical, Plumbing, Firefighting, and Low\-Voltage systems with the development and coordination of intelligent BIM models. You will contribute to projects across commercial, residential, hospitality, healthcare, IT/ITES, data centre, industrial, and infrastructure sectors — working alongside architects, structural engineers, sustainability consultants, and project teams across India and overseas.

Key Responsibilities

MEP Design

Develop MEP design deliverables — concept, schematic, detailed design, tender, and GFC — for commercial, residential, hospitality, healthcare, data centre, and infrastructure projects.
Perform heat load calculations, duct/pipe sizing, cable sizing, lighting and power load calculations, transformer/DG sizing, pump sizing, and drainage design.
Prepare design basis reports (DBR), technical specifications, BOQs, equipment schedules, and single\-line diagrams.
Ensure designs comply with NBC, IS, ASHRAE, NFPA, NEC, CIBSE, SMACNA, IPC, UPC, and applicable local/international codes.
Contribute to value engineering, peer review, and expert review assignments in line with Clancy Global’s service portfolio.
Support sustainability\-driven design aligned with LEED, IGBC, GRIHA, WELL, and Estidama frameworks.

BIM Modeling \& Coordination

Develop MEP BIM models in Autodesk Revit across LOD 200 to LOD 500 for HVAC, electrical, plumbing, firefighting, and low\-voltage disciplines.
Drive multidisciplinary clash detection and resolution using Navisworks Manage, working closely with architectural, structural, and civil teams.
Implement and follow project BIM Execution Plans (BEP), LOD matrices, and Clancy Global’s in\-house BIM standards, templates, and family libraries.
Use collaborative platforms such as BIM 360 / Autodesk Construction Cloud (ACC) /Archicad / Brickcad for model sharing, issue tracking, and design review.
Extract construction drawings, shop drawings, sections, schedules, and isometrics directly from the BIM model with consistent quality.
Support tech\-enabled workflows including Dynamic Thermal Simulation, CFD inputs, and parametric/Dynamo\-based automation, where applicable.

Coordination \& Project Delivery

Coordinate with architects, structural engineers, sustainability consultants, vendors, and contractors to deliver integrated and constructible MEP solutions.
Participate in design review meetings, clash coordination sessions, and client presentations — in\-person and virtual, including international coordination with Clancy Consulting UK teams.
Respond to RFIs, issue design clarifications, and review vendor submittals and shop drawings during construction.
Support tendering, cost estimation, procurement management, and site visits/inspections as required.

Quality, Compliance \& Documentation

Ensure design and BIM deliverables meet Clancy Global’s QA/QC standards, client requirements, and statutory compliance.
Maintain proper drawing registers, revision control, and project documentation.
Contribute to continuous improvement of design templates, BIM libraries, and best\-practice guidelines.

Required Qualifications

Education

B.E. / B.Tech in Mechanical, Electrical, Electrical \& Electronics, or Building Services Engineering from a recognized institution.
M.E. / M.Tech in HVAC, Energy Systems, or Building Services Engineering is an added advantage.
Certification in Autodesk Revit MEP / BIM (Autodesk Certified Professional preferred).

Experience

Minimum 5 years of combined experience in MEP design consultancy and BIM modeling/coordination.
Demonstrated delivery of at least 3–5 projects using end\-to\-end BIM workflows, preferably across two or more sectors (commercial, hospitality, healthcare, data centre, residential, or industrial).
Prior experience with a design consultancy, MEP consultancy, or architecture\-engineering firm is strongly preferred.
Exposure to international projects (UK, Middle East, Southeast Asia, or Africa) will be a strong plus.

Technical Skills

Strong design knowledge across HVAC, electrical, plumbing, firefighting, and low\-voltage/ELV systems.
Proficiency in Autodesk Revit MEP, AutoCAD, Navisworks Manage, and BIM 360 / ACC.
Working knowledge of simulation and calculation tools such as HAP, McQuay, IESVE, Dialux/Relux, ETAP, and Pipe Flow Expert.
Understanding of ISO 19650, BIM Execution Plans, LOD frameworks, and clash management workflows.
Familiarity with Dynamic Thermal Simulation and CFD inputs is desirable, aligning with Clancy Global’s in\-house capabilities.
Basic knowledge of Dynamo or other parametric/automation tools is a plus.

Soft Skills

Strong analytical, problem\-solving, and coordination skills.
Clear written and verbal communication, with the ability to engage confidently with clients, architects, and international teams.
Ability to manage multiple projects, meet deadlines, and adapt to a tech\-enabled, fast\-paced consultancy environment.
Collaborative mindset aligned with Clancy Global’s ethos of multidisciplinary teamwork and long\-term relationship building.

Preferred (Good to Have)

Experience with green building certifications — LEED, IGBC, GRIHA, WELL, or Estidama.
Exposure to Smart Infrastructure, Smart Cities, or tech\-enabled Project Management / PMC assignments.
Chartered Engineer status or active membership with ASHRAE, CIBSE, IEEE, or similar bodies.
Prior site coordination experience during construction and commissioning stages.

Key Deliverables

Coordinated, clash\-free MEP BIM models across all project stages.
Accurate design calculations, drawings, specifications, and BOQs.
Timely issuance of tender, GFC, and as\-built deliverables.
Compliance with Clancy Global’s quality standards and client expectations on budget, schedule, and design intent.

Note: Compensation will be commensurate with experience, technical depth, and project exposure. Shortlisted candidates should be prepared to walk through past MEP design and BIM projects during the interview.

Pay: ₹40,000\.00 \- ₹50,000\.00 per month